نانو ذرات تیتان Tio2 برای اکسید کردن آلاینده های آلی و همچنین جذب فلزات سنگین در مکانهای آلوده مورد استفاده قرار می گیرند . این نانو ذره مواد آلاینده آلی را به آب ( H2O ) و دی اکسید کربن( Co2 ) تبدیل می کند . با توجه به تحقیقات برداشت می شود که از این ماده می توان برای رفع آلاینده ها ، ویروسها و مواد شیمیایی آلی خطرناک نیز استفاده کرد . همچنین این نانو ذره مهمترین کاتالیستی است که برای حذف آلودگی های ناشی از مواد آلی موجود در آبهای آلوده به مواد نفتی و نیز پسابهای صنعتی مورد استفاده قرار می گیرد.
نحوه به عمل آوردن ذرات نانو تیتان ( Tio2 ) بدین گونه است که : آنرا در زیر لایه های مناسبی پوشش داده و در حوضچه هایی تحت تابش نور فرابنفش قرار می دهند . در اثر تابش این نور ماده خاصیت اکسید کنندگی پیدا می کند و موادآلی را به آب ( H2O ) و دی اکسید کربن ( Co2 ) تبدیل می کند. و نیز بعضی از اسیدهای معدنی را تجزیه می کند.
طبق آزمایشات به عمل آمده ، پساب آلوده به مواد نفتی پس از ۷ روز توسط این نانو ماده تجزیه می شود. برای بازدهی بیشتر این نانو ماده از آهن ( Fe ) هم استفاده می کنند که آهن عمل اکسایش تحت تابشهایی با طول موج بلند تر و به طور ویژه در ناحیه نور مرئی را ممکن می سازد.
نانولولههای کربنی میتوانند برای تشکیل غشاهایی با تخلخل نانومتری و دارای قابلیت جداسازی آلودگیها، به طور یکنواخت همراستا شوند. تخلخلهای نانومتری نانولولهها این فیلترها را از دیگر فناوریهای فیلتراسیون بسیار انتخابپذیرتر نموده است. همچنین نانولولههای کربنی دارای سطح ویژه بسیار بالا، نفوذپذیری زیاد و پایداری حرارتی و مکانیکی خوبی هستند. اگر چه چندین روش برای سنتز نانولولههای کربنی استفاده شده است، غشاهای نانولولهای میتوانند به وسیله پوششدهی یک ویفر سیلیکونی با نانوذرات فلزی به عنوان کاتالیست، که موجب رشد عمودی و فشردگی بسیار زیاد نانولولههای کربنی میشود، سنتز شوند و پس از آن برای افزایش پایداری، فضای بین نانولولههای کربنی را با مواد سرامیکی پر نمود.
حذف آلودگیها
مطالعات آزمایشگاهی نشان میدهد که غشاهای نانولولهای میتوانند تقریباً همه انواع آلودگیهای آب را حذف کنند؛ این آلودگی شامل باکتری، ویروس، ترکیبات آلی و تیرگی است. همچنین این غشاها نویدی برای فرایند نمکزدایی و گزینهای برای غشاهای اسمز معکوس هستند.
مقدار تصفیه آب
اگر چه تخلخل نانولولههای کربنی به طور قابل توجهی کوچک است، غشاهای نانولولهای نشان دادهاند که به خاطر سطح داخلی صاف نانولولهها، شدت جریان بیشتر یا یکسانی نسبت به تخلخلهای بسیار بزرگتر دارند.
هزینه
با توسعه روشهای جدید و بسیار مؤثر برای تولید نانولولههای کربنی، هزینه تولید غشاهای نانولولهای به طور پیوسته کاهش مییابد. بر اساس پیشبینی برخی منابع، به دلیل کاهش قیمت نانولولههای کربنی، غشاهای نانولولهای بسیار ارزانتر از سایر غشاهای فیلتراسیون، غشاهای اسمز معکسوس، سرامیک و غشاهای پلیمری خواهد شد. از آن جا که نانولولههای کربنی شدت جریان بالایی را نشان میدهند، فشار مورد نیاز برای انتقال آب نسبت به فرایند نمکزدایی با اسمز معکوس، کاهش مییابد و به دلیل این ذخیره انرژی، نمکزدایی با استفاده از فیلترهای نانولولهای بسیار ارزانتر از اسمز معکوس خواهد بود. انتظار میرود غشاهای نانولولهای بسیار بادوامتر از غشاهای متداول باشند و استفاده مجدد از آنها بازدهی فیلتراسیون را کاهش ندهد.
روش مصرف
غشاهای نانولولهای میتوانند در گزینههای مشابهی به عنوان غشاهای میکروفیلتراسیون و اولترا فیلتراسیون استفاده شوند. مطالعات نشان میدهد که این مواد بادوام و در برابر گرما مقاومند و تمیز کردن و استفاده مجدد از آنها ساده است و با استفاده از فرایند اولتراسونیک و اتوکلاو درC ْ۱۲۱ در مدت ۳۰ دقیقه تمیز میشوند.
توضیحات تکمیلی
انتظار میرود در پنج الی ده سال آینده، شاهد ورود غشاهای نانولولهای نمکزا به بازار باشیم. اخیراً محققان برای غلبه بر چالشهای مرتبط با افزایش مقیاس فناوری، فعالیتهای تازهای را مدنظر قرار دادهاند.
Titan Tio2 nanoparticles to oxidize organic pollutants and heavy metals in contaminated areas are used. The nano-particles of organic pollutants in water (H2O) and carbon dioxide (Co2) converts. According to research that may be drawn from this material can be used to remove pollutants, viruses, and harmful organic chemicals used. It is also important nanoparticle catalyst for the removal of organic matter in polluted water pollution caused by oil and industrial effluents are used.
How to get the Titan nanoparticles (Tio2) is thus: it is a good substrate covered in puddles are irradiated with ultraviolet light. The light emitting properties of the oxide and organic produce found in water (H2O) and carbon dioxide (Co2) converts. And also breaks down some of the mineral acids.
The tests are carried out, wastewater contaminated with oil after 7 days by the nano material decomposes.
Carbon nanotubes can be used to form membranes with nanoscale porosity and has the ability to remove impurities, are evenly aligned. Nanoporosity formed nanotube filters and other filtration technologies is very Antkhabpzyrtr. Carbon nanotubes also have a very high surface area, high permeability and good thermal and mechanical stability.The space between the carbon nanotubes filled with a ceramic material.
Remove impurities
Laboratory studies have shown that nanotube membranes can remove almost all types of water pollution, the pollution, including bacteria, viruses, organic compounds and is darkness. It membranes for reverse osmosis membranes are promising for the desalination option.
The amount of water
Although the porosity is significantly smaller carbon nanotubes, nanotube membranes have shown that due to the smooth inner surface of the nanotubes, the intensity is larger than or equal to Tkhlkhlhay.
Cost
With the development of new and effective methods for producing carbon nanotubes, nanotube membranes steadily reduced production costs. According to some sources anticipated, due to lower prices of carbon nanotubes, nanotube membranes is much cheaper than other filtration membranes, Mksvs osmosis membranes, ceramic and polymeric membranes will. Since carbon nanotubes show high flow rate, the pressure required for the transfer of water for desalination by reverse osmosis process, lowered, because the energy storage, desalination using reverse osmosis filters nanotube will be much cheaper. Nanotube membranes are expected to be very durable and reuse of conventional membrane filtration efficiency not lower them.
Method of application
Nanotube membranes can have similar options as microfiltration and ultrafiltration membranes used for filtration.
Studies show that these materials are durable and heat-resistant and easy to clean and reuse them
Using ultrasonic process in the C 121 and autoclave for 30 minutes to be cleaned.
Further Details
Expected in five to ten years from the entry into the market are causing salt nanotube membranes. Recently researchers to overcome the challenges associated with increasing scale technologies, new activities have been considered.
Relax water purifier, industrial and semi-industrial water treatment system, water treatment system Pure tek ionized water, alkaline ionized water, storage tanks, six-stage water filtration system, water treatment system, salted, industrial reverse osmosis water purification units, alkaline ionized water sales, the benefits of ionized water, industrial water treatment equipment prices, storage tanks, floating roof storage tanks, storage tank construction